The Poly-IBC product properties
• highest protection against damage from outside
• optimal deformation characteristic at high dynamic loads
• high stackability (min. 2 high) static load up to 1.7
• increased multiple trips
• 100%non-corrosive
• 100%recyclable
• high cost-to-benefit rate
• efficient reconditioning
UC 1000 – Capacity: 1,000 litres
• high purity bottle– very low tracemetals, very low particle generation
• for UV-sensitive chemicals
• approved for nitric-acid (70%)
• without bottom outlet
• three top fill ports
• multi-trip IBC
• non-corrosive
• UN-approved
• DOT Certified
P/N 11000008
UN Approval-No.: 31 HH1/Y/BAM/6808/3314/2070
DOT Approval-No.: 31HH1/Y/USA/+4174/0/2059
| Technical data |
| Dimensions L x W x H |
39” x 47” x 46” |
| Weight |
211 lbs |
| Filling hole |
3 x S 62 x 5 |
Poly-IBC consisting of:
Poly-IBC, (outside) box
• manufactured by a proprietary stretchmoulding-process inclusiveof pallet feet moulded in one step
• coextruded wall-design with three layers
• inside and outside layer HDPE
• center layer made with HDPE plus structural foam
• outside dimensions: 1200 x 1000 x 1170 mm
• weight: approx. 55 kg
Poly-IBC, (inside) bottle
• manufactured by a patented coextrusion blowmoulding-process
• two layer wall-design
• inside layer made from HDPE no additives
• outside layer made from HDPE
• the dimensions are equivalent to the international standard of the marketable bottles
• weight: approx. 21 kg
Poly-IBC, (top) cover
• optional open or closed design from HDPE
• weight: approx. 9 kg
Poly-IBC, (bottom) pallet
• frame design from HDPE
• exchangeable pallet boards
• weight: approx. 7 kg
|
